Mains fed information
Mains fed water coolers that we supply are fitted with one of the highest grade water filters in the industry.
Our mission is to provide you with an excellent value for money cooler, fitted hassle free to your home or workplace with as little disruption as possible to yourselves.
Our free site survey enables us to locate your water source and make sure we have everything that is needed to fully quote you for installation. We must reiterate that the person who does the site survey is a fully trained water cooler technician, not a sales person.
Even if the criteria for fitting mains fed cooler falls outside the standard fitting practice, we shall endeavor to give you the best price for any extra work involved.
Standard fitting criteria:
1) Cooler must have a 3 pin standard power available within 1.5 meters (longer power leads are available, but an extra cost could be involved).
2) Drinking water source must be available within 5 meters (15 mm copper pipes, with isolator valve nearby) we can have further distances involved, but this may have an extra cost involved.
Pic 1 shows:
A saddle valve fitted to 15mm pipe
With water block, reset valve fitted to standard 6 mm feed pipes.
Pic 2 shows:
Typical 15mm pipes that we could use for the installation procedure, we would locate the cold water feed and fit all needed equipment.
Normal feeds to pipes are in areas such as: under sinks, toilet areas, kitchen areas.
Pic 3 shows:
Typical inder sink saddle valve fitment.
For unsecured areas such as school classrooms etc, we can offer different type fittings if needed.
